[1] Negas T, Yeager G, Bell S, and Coats N,BaTi4O9/Ba2Ti9O20-based ceramics resurrected for modern microwave applications, Am. Ceram. Soc. Bull., 1993, 72: 80.[2] Desu S.B. and Bryan H.M., Microwave loss quality of Ba(Zn,Mg)1/3Ta2/3O3 ceramics, J. Am. Ceram. Soc., 1985, 68: 546.[3] Nishigaki S., Kato H., Yano S., and Kamimura R., Microwave dielectric properties of (Ba, Sr)O-Sm2O3-TiO2 ceramics, Am.Ceram. Soc. Bull., 1987, 66: 1405.[4] Freer R., Microwave dielectric ceramics?an overview, Silic.Ind., 1993, 58: 191.[5] Reaney I.M., Wise P., Ubic R., Breeze J., and Alford N., On the temperature coefficient of resonant frequency in microwave dielectrics. Philos. Mag. A, 2001, A81: 501.[6] Wersing W., Microwave ceramics for resonators and filters,Curr. Opin. Solid State Mater. Sci., 1996, 1: 715.[7] Ezaki K., Baba Y., Takhashi H., and Shibata K., Microwave dielectric properties of CaO-Li2O-Ln2O3-TiO2 ceramics, Jpn.J. Appl. Phys. Part 1, 1993, 32 (9B): 4319.[8] Kucheiko S., Choi J.W., Kim H.J., and Jung H.J., Microwave dielectric properties of CaTiO3-Ca(Al1/2Ta1/2)O3 ceramics, J.Am. Ceram. Soc., 1996, 79: 2739.[9]TobarM.E., Krupka J., Ivanov E.N., and Woode R.A., Dielectric frequency-temperature-compensated microwave whispering-gallery-mode resonators, J. Phys. D, 1997, 30: 2770.[10] Breeze J., Penn S.J., Poole M., and Alford N.M., Layered Al2O3-TiO2 composite dielectric resonators, Electron. Lett.,2000, 36: 883.[11] Tobar M.E., Hartnett J.G., Ivanov E.N., Cros D., and Guillon P., Cryogenically cooled sapphire-rutile dielectric resonators for ultrahigh-frequency stable oscillators for terrestrial and space applications, IEEE Trans. Microwave Theory Tech.,2000, 48: 1265.[12] Sebastian M.T., Jawahar I.N., and Mohanan P., A novel method of tuning the properties of microwave dielectric resonators,Mater. Sci. Eng. B, 2003, 97: 258.[13] Lei L., Xiang M.C., and Xie C.F., Microwave dielectric properties of MgTiO3-SrTiO3 layered ceramics, J. Eur. Ceram.Soc., 2006, 26: 2817.[14] Gu Y.J., Huang J.L., and Li Q., Low-temperature firing and microwave dielectric properties of 16CaO-9Li2O-12Sm2O3-63TiO2 ceramics with V2O5 addition, J. Eur. Ceram. Soc.,2008, 28: 3149.[15] Gu Y.J., Huang J.L., and Wang Y., Low temperature firing of CaO-Li2O-Sm2O3-TiO2 ceramics with BaCu(B2O5) addition,Solid State Commun., 2009, 149: 555.[16] Yoon K.H., Park M.S., Cho J.Y., and Kim E.S., Effect of B2O3-Li2O on microwave dielectric properties of(Ca0.275Sm0.4Li0.25)TiO3 ceramics. J. Eur. Ceram. Soc., 2003,23 (14): 2423.[17] Lim J.B., Jeong Y.H., Nguyen N.H., and Nahm S., Low temperature sintering of the Ba2Ti9O20 ceramics using B2O3/CuO and BaCu(B2O5) additives. J. Eur. Ceram. Soc., 2007, 27(8-9): 2875.[18] Kim M.H., Lim J.B., Nahm S., Paik J.H., and Lee H.J., Low temperature sintering of BaCu(B2O5)-added BaO-Re2O3-TiO2(Re = Sm, Nd) ceramics. J. Eur. Ceram. Soc., 2007, 27 (8-9):3033.[19] Zhou D., Wang H., Yao X., and Pang L.X., Microwave dielectric properties and co-firing of BiNbO4 ceramics with CuO-WO3 substitution, Mater. Sci. Eng. B, 2007, 142 (2-3):106.[20] Liu X.C., Gao F., Zhao L.L., and Tian C.S., Low-temperature sintering and phase transition of zinc titanate ceramics with V2O5 and B2O3 addition, J. Alloys Compd., 2007, 436 (1-2):285.[21] Yang Y., Ding S.H., and Yao X., Study on the relationship between the defect and dielectric properties of ZnO doped BiNbO4 ceramic, Ceram. Int., 2004, 30: 1335.[22] Huang C.L. and Weng M.H., Liquid phase sintering of (Zr,Sn)TiO4 microwave dielectric ceramics, Mater. Res. Bull.,2000, 35: 1881.[23] Huang C.L., Microwave dielectric properties and microstructures of CuO-ZnO doped LaAlO3 ceramics, Mater. Res. Bull.,2002, 37: 449.[24] Ho I., Semiconducting barium titanate ceramics prepared by boron-containing liquid-phase sintering, J. Am. Ceram. Soc.,1994, 77 (3): 829. |