Study on the microstructure evolution of Cu60Cr40 alloy during microwave sintering
DONG Zhong-qi1,YIN Su-hua1,GAI Guo-sheng2
1. Metal Material Engineering Research Institute, Hebei College of Industry and Technology, Shijiazhuang 050091, China 2. School of Materials Science and Engineering, Tsinghua University, Beijing 100084, China
Abstract:The Cu60Cr40 alloy was prepared using mechanical alloying, cold pressing and microwave sintering. The phase composition and microstructure of the Cu60Cr40 alloy were analyzed by XRD and SEM, respectively. The microstructure evolution rule of Cu60Cr40 alloy was investigated during the microwave sintering. Results show that, the microstructure of Cu60Cr40 alloy powder and cold pressed blank is lamellar. With the increase of sintering temperature, the microstructure of the Cu60Cr40 alloy transforms from laminar into short rod ball or ball grains, the grain boundary gradually becomes obvious, the porosity is reduced, and the density increases, the sintering process changes from solid phase sintering into liquid phase sintering.
董中奇,尹素花,盖国胜. 微波烧结过程中Cu60Cr40合金组织演变的研究[J]. , 2016, 26(06): 30-34.
DONG Zhong-qi,YIN Su-hua,GAI Guo-sheng. Study on the microstructure evolution of Cu60Cr40 alloy during microwave sintering. , 2016, 26(06): 30-34.
[1]Aguilar C, Ordo?ez S, Guzman D, Rojas P A.Mechanical alloying of Cu–xCr (x= 3,5 and 8 wt%) alloys[J].Journal of Alloys and Compounds, 2010, 504(1):102-109
[2] Zhang C Y, Wang Y P, Yang Z M, et al.Microstructure and properties of vacuum induction melted CuCr25 alloys [J] . [J].Journal of Alloys and Compounds, 2004, 366((2)):289-296
[3]Aguilar C, Guzmán D, Castro F, Martínez V, Cuevas F D L, Lascano S, Muthiah T.Fabrication of nanocrystalline alloys Cu–Cr–Mo super satured solid solution by mechanical alloying[J].Materials Chemistry & Physics, 2014, 146(3):493-502
[4]Benjamin J.Mechanical alloying[J].Scientific American, 1976, 234(5):40-8
[5]Othman A R, Sardarinejad A, Masrom A K.Effect of milling parameters on mechanical alloying of aluminum powders[J].International Journal of Advanced Manufacturing Technology, 2014, 76(5-8):1319-1332