Effect of braking pressure on friction of copper-based powder metallurgy brake materials
ZENG Xin1, LI Feng2
1.?Wuhan Vocational College of Software and Engineering, Wuhan 430205, China 2.?College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan 030024, China
Abstract:The tribological properties of copper-based powder metallurgy train brake materials at different brake condition were tested on MM-2000II friction tester. The results show that, the grains have obvious stacking fault stripes when annealed at 900 ℃ for 2 h, which form into a barrier to hinder the dislocation movement and lead to dislocation annihilation difficulty, and make the sub-grain boundaries or grain boundaries increase, grain refinement and materials hardness enhancement. With the increasing of the braking pressure, the friction coefficient increases firstly and then decreases, and has a good stability generally, the wear mass loss increases and turns to be stable gradually.
[1] P. F. Gao, H. Yang, X. G. Fan, et al. Quick prediction of the folding defect in transitional region during isothermal local loading forming of titanium alloy large-scale rib-web component based on folding index[J]. Journal of materials processing technology, 2015, (219): 101-111. [2] A. Akbarzadeh, S. Naghdy. Hot workability of a high carbon high chromium tool steel[J]. Materials and Design, 2013, 46, 654-659.[3] 符蓉, 张学东, 宋宝韫, 高飞. 高速列车铜基陶瓷强化制动材料的研究进展[J]. 机车车辆工艺, 2006, 46, 27-32.[4] 高鸣, 陈跃, 张永振, 展雪梅.制动条件对动车进口刹车片制动性能的影响[J]. 材料热处理技术, 2011, 40(8). 46, 487-196.[5] 王磊, 李岫, 郭晓辉, 金景云. 高速列车粉末冶金制动闸片摩擦、磨损性能研究[J]. 机车车辆工艺, 2008(5). 46, 654-659.[6] 姚萍屏,盛洪超,熊翔,等. 压制压力对铜基粉末冶金刹车材料组织和性能的影响粉末冶金材料科学与工程,[J]. 粉末冶金材料科学与工程, 2011, (3). 26, 365-371.[7] Lehua Qi, Jian Liu, Juntao Guan, et al. Tensile properties and damage behaviors of Csf/Mg composite at elevated temperature and containing a small fraction of liquid[J]. Composites Science and Technology, 2012, 72, 1774-1780. [8] 张光华. 相位角120°锻造曲轴探伤磁痕产生机理及减轻方法[D]. 重庆: 重庆大学, 2011. [9] 许长林, 张瑞卿, 肖井广, 等. 钢材不同生产工艺对锻钢曲轴磁痕影响的探讨[J]. 金属加工, 2013, (23): 48-49. [10] Fei Feng, Shangyu Huang, Zhenghua Meng, et al. Experimental study on tensile property of AZ31B magnesium alloy at different high strain rates and temperatures[J]. Materials and Design, 2014, 57, 10-20. [11] M. EI Mehtedi, F. Musharavati, S. Spigarelli. Modeling of the flow behavior of wrought aluminium alloys at elevated temperatures by a new constitutive equation[J]. Materials and Design, 2014, 54, 869-873. [12] 牟超. 摩擦条件对制动闸片摩擦磨损性能的影响[D]. 大连: 大连交通大学, 2008.