SAW process parameters on the deposited metal and the influence of joint organization and performance
WANG Xin1，L Shang- zhi2，SUO Zhong- yuan1，JIANG Feng1 ，ZHANG Zi- hao1
1College of Mechanical and Electrical Engineering, Jilin Institute of Chemical Technology，Jilin 132022, Jilin，China 2 Amec Foster Wheeler Power Machinery Co,Ltd, Jiangmen 529141，Guangdong,China
Abstract：The 16Mn of 12 mm thick steel plate welding procedure test was made by using SAW The SAW welding process parameters on the deposited metal and the influence of joint microstructure and properties were analyzed through joint macroscopic measurement, microstructure analysis, microhardness test and impact test at room temperature The results show that the affect of SAW current, voltage on joint macro dimensionIn medium specification (current 540 A,voltage 36 V,welding speed 32 m/h),the joint organization fine uniform and better toughness, the impact absorption power of weld zone and heat affected zone were 92 J and 72 J respectively, increased by 2737% and 3699% respectively than other samples.
王鑫，吕尚志，索忠源，姜峰，张志浩. SAW工艺参数对熔敷金属及接头组织与性能的影响[J]. , 2016, 23(2): 45-49.
WANG Xin，L Shang- zhi，SUO Zhong- yuan，JIANG Feng ，ZHANG Zi- hao. SAW process parameters on the deposited metal and the influence of joint organization and performance. , 2016, 23(2): 45-49.
Tusek J. Submerged arc welding with double and triple wire electrode [J]. The InternationalJournal of Joining of Materials，1994,6(3):105-110.
[4]
陈旭.16MnR 钢焊接接头低周疲劳性能[J].化工生产与技术,2000,7(3):10-12.
[5]
Ghosh PK,Gupta PC.Use of pulse current MIG welding improves the weld characteristics of Al-Zn-Mg Alloy[J] .IndianWeld,2010,15(3):24-32.
[6]
张维.国内外焊接材料的现状及发展前景[J].焊接材料,2012,5(2):5-8.
[7]
尹士科.低合金高强度钢焊缝金属组织的研究[J].金属学报,1987,23(5):6-8.
[8]
温志红.提高Q345系列钢板冲击韧性的扎制工艺探讨[J].南方金属,2004,12(2):7-9.
[9]
李鹤岐，王新，蔡秀鹏.国内外埋弧焊的发展状况[J].电焊机,2006,36(4):2-4.
[10]
Tusek J，Suban M. High-productivity multiple-wire submerged welding and cladding with metal-power addition [J]. Journal of materials processing Technology,2003,133(12):207-213.
2016, Vol. 23 
